Clover Technologies Group DV1630 Manuel d'instructions télécharger pdf (Page 34)

Page 5 of 69

Chapter 1 - Installation

Box Contents

The following parts are included in the box.

▪ Digital Video Recorder 1 unit

▪ CD (Manual & Program) 1 piece

▪ Remote Controller 1 unit (Including AAA battery x 2)

▪ AC/DC adapter 1 piece (12V/4A, 110Vac/220Vac)

▪ AC power cord 1 piece (220V or 110V)

▪ Screws for HDD 1 set

Choosing a location for installation

The unit is designed for desk mount. The following precautions must be taken during installation.

• Openings in the case are for ventilation purpose. To prevent overheating, these

ventilation openings should not be blocked or covered.

• Ensure that there is 2” gap on either side of the unit.

• When stacking units, ensure there is at least 1” gap between each unit.

• Ensure the unit is not located in an area where it is likely to be subject to mechanical

shocks.

• The unit should be located in an area with low humidity and a minimum of dust.

• If the unit is to be installed in a closed assembly, the maximum operating temperature

must not exceed 104℉(40℃)

• Ensure there is reliable earthling of the mains outlet when fitted to supply connections,

other than direct connection, to the branch circuit.

• It is recommended that an uninterruptable power source be connected to the unit in

case of power failure, to ensure continuous operation of the unit.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 114 115

Pas de commentaire

Clover Technologies Group DV1630 Manuel d'instructions Page 34