Clover Technologies Group PAC0820 Manuel d'instructions télécharger pdf (Page 23)

- 23 -

3.5 Hardware Installation

It is recommended that the installations described below are carried out by qualified

personnel.

3.5.1 Basic Connections

 Cameras

Connect each of the cameras’ outputs to the video input socket in the rear

panel of the DVR using appropriate cables. The video input interface is a

standard BNC connector, 1Vp-p, 75 Ω. Please keep the video signal cable

away from strong electromagnetic and electric interference.

 Audio Connection

The audio input interface is a standard BNC socket.

Please keep the audio signal cable away from strong electromagnetic and

electric interference.

 Monitor

Connect the main output connector to a monitor or a TV screen. Use a

BNC-to-RCA converter, if needed, to work with the Audio/Video RCA cable.

 Power

Please use the 220V AC supplied for connecting your DVR device with the

power source.

 Alarm Input / Output----(optional)

Connect Alarm In 1-16 to N. O. (Normally Open) or N.C. (Normally Closed)

alarm connectors and one Ground connection. Connect Alarm Out to the

corresponding connections and Ground accordingly.

For detailed description please see Section 5.3.4 Alarm Input.

D1/CIF 4/8CH D1 16CH CIF 16CH

 Ethernet

For remote access to the video images from your cameras via LAN or the

Internet, please connect the standard RJ-45 twisted-pair Ethernet cable to the

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 102 103

Pas de commentaire

Clover Technologies Group PAC0820 Manuel d'instructions Page 23